Veris-technologies Quad 2800 Soil EC Mapping System - Operating Instr Manuel d'utilisateur télécharger pdf (Page 3)

OM17-Quad2800

1-3

Important! Read the following SAFETY PROCEDURES before operating the Veris system:

• Read and understand all instructions on safety decals

• Properly block up implements befor working underneath.

• Detach and store implements in an area where children normally do not play. Secure implement

by using blocks and supports.

• Read Operations Manual before operating machine

• Review safety instructions with operators before operating machine and at least annually

• Never stand on or use tire as a step

• Do not tow the implement on public roads.

• Riders obstruct the operator’s view. They could be struck by foreign objects or thrown from the

machine.

• Never allow children to operate equipment.

• To prevent possible electrical shock, or damage to the instrument, do not connect to any power

source greater than twelve (12) volts DC.

• Do not grease or oil implement while it is in operation.

• Disk edges are sharp. Be careful when working in this area.

• Disconnect battery ground cable (-) before servicing or adjusting electrical systems or before

welding on implement.

• Remove buildup of mud, oil or debris.

• Be very careful when mapping stubble fields using a vehicle with a gasoline engine. Be prepared

if a fire starts. Keep crop residue and other debris from accumulating near the exhaust and in

engine compartment.

• Keep a first aid kit and fire extinguisher handy.

Section 2

Electronics Overview and Set-up

The Veris Electronics kits includes the following items:

Data-

Logger

Protective

case

1 2 3 4 5 6 7 8 ... 43 44

Pas de commentaire

Veris-technologies Quad 2800 Soil EC Mapping System - Operating Instr Manuel d'utilisateur Page 3