Veris-technologies pH Detector - Operating Instructions Manuel d'utilisateur télécharger pdf (Page 6)

OM17-pH Detector

2-3

Attaching pH Detector to ATV

Mount tank to rear rack of ATV using nylon straps or zip ties through holes in tank base(Figure 4).

Figure 5

Slide receiver hitch tubing inside lower main frame tube of pH Detector. If your ATV is equipped

with large receiver hitch, slide receiver hitch tubing directly into ATV receiver hitch and pin (Figure

5). If your ATV has a hole, or small receiver hitch, it will be necessary to use end of hitch tubing

with threaded holes. Attach L-bracket to these holes and bolt to ATV hitch hole (Figure 7).

Figure 6 Figure 7

Position pH Detector as close to rear of ATV as possible but don’t restrict probe movement. Attach

stabilizers to rear rack (Figure 8). These brackets can be bent to fit various racks. Once pH

Detector assembly is in position, tighten all bolts including hitch bracket bolts (Figures 5 and 6).

tighten bolts after

unit has been

positioned and

stabilizer arms

attached

ATV hitch

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Pas de commentaire

Veris-technologies pH Detector - Operating Instructions Manuel d'utilisateur Page 6