Veris-technologies OpticMapper - Operating Instructions Manuel d'utilisateur télécharger pdf (Page 59)

Pub.# OM17-OpticMapper

6-25

Procedure #10: Optical Wear plate and Side Wear plate replacement.

1. Remove the bolts attaching the optical

sensor assembly to the row unit.

2. Remove the hex screws attaching the side

plates to the optical sensor.

3. To remove wear plate, unscrew the hex

bolts on the top of the optical sensor as

shown in figure 10.2

4. Now to replace the wear place, ensure the

O-ring is seated in the o-ring grove as shown

in figure 10.3.

5. Install the wear plate and side plates,

Then mount the assembly back to the row

unit.

Figure 10.1

Figure 10.2

Figure 10.3

Figure 10.2

1 2 ... 54 55 56 57 58 59

Pas de commentaire

Veris-technologies OpticMapper - Operating Instructions Manuel d'utilisateur Page 59