Veris-technologies Quad 2800 Soil EC Mapping System - Operating Instr Manuel d'utilisateur télécharger pdf (Page 38)

OM17-Quad2800

6-16

Procedure #6: SD card formatting and firmware updates

USING A VERIS SD CARD IN OTHER DEVICES CAN CAUSE FILE CORRUPTION.

Insert a standard SD card (not SDHC type) into a SD card reader which connected to your

computer.

Open “My Computer” folder. Right click on the SD card icon, and select the “Format”.

Figures 6.1 a and b.

In the format window, click on the file system tab and select “FAT” not “FAT32”.

Then press “Start”.

When complete, remove the card.

Updating Data Logger Firmware

1. Shut off the power of the Data Logger.

2. Copy the firmware on the SD card. (firmware found at veristech.com software download site)

3. Put the SD card into the Data Logger.

4. Turn on the power of the Data Logger.

5. Press the RESET button on the rear panel and (1) key simultaneously.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Veris-technologies Quad 2800 Soil EC Mapping System - Operating Instr Manuel d'utilisateur Page 38