Veris-technologies EC Force Probe - Operating Instructions Manuel d'utilisateur télécharger pdf (Page 24)

OM17-P4000 Force/EC

5-11

Installing on Tractor –

- All bushings and pins are provided for Category I and II three-point hitches.

- Connect lower links – make sure you include the stabilizer link bushings(Figure

24)

- Connect top link

- Raise three point to desired height and level with top link

- Install lower stabilizer mount on drawbar and tighten 5/8” bolts

- Connect LH and RH stabilizer to upper and lower points, adjust, and lock with

jam nut.

- Connect hydraulic hoses noting P and T

- Retract stabilizer stands and engage hydraulics -- locking valve into detent with

tarp strap or other device. Make sure that flow is correct or controls will be

backward.

Figure 21

Fold and

Extend hoses

Disconnect

wiring

Figure 22

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 32 33

Pas de commentaire

Veris-technologies EC Force Probe - Operating Instructions Manuel d'utilisateur Page 24