Veris-technologies MSP3 - Operating Instructions Manuel d'utilisateur télécharger pdf (Page 44)

Pub. #OM17-MSP3

4-24

OM Data Quality

Check depth of sensor – Make a couple of trial passes to make sure the sensor is running at the

proper depth. Recommended depth is 2-3 inches.

Add weights or adjust down pressure on row unit if needed

Also make sure the row unit side depth wheels and disks are rotating freely, and are clear of

excess mud and crop residue.

For row unit adjustments see page 4-22.

Monitoring the window –Observe OM readings at row ends when unit is raised, if they are not

within 10% of the initial raised readings, check windows for mud, smearing, and/or window

breakage.

Varying Field Conditions – In order to have high data quality the field conditions need to be the

same for an entire data set. Any of the following can affect data quality: in-field soil temperature

and moisture difference, change in down pressure or depth gauge wheel setting. If conditions

change, start a new file.

Figure 66 is an example of how these items can affect data quality.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 115 116

Pas de commentaire

Veris-technologies MSP3 - Operating Instructions Manuel d'utilisateur Page 44